INTRODUCTION Thank you for purchasing this CLARKE Hydraulic Garage Jack Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service.
8. NEVER exceed the rated load for the jack (See “Specifications” on page 2.). 9. Do not use if an oil leak is apparent. Consult your Clarke dealer. SPARE PARTS The following user serviceable parts are available from your Clarke dealer, or Clarke International Parts Department.
OPERATION Ensure the load is chocked and stable and on firm level ground 1. Position the jack so that the saddle is directly beneath the lifting point and that there are no obstacles to prevent a clean lift, also, make sure that all personnel are well away from the area, before raising the vehicle.
BEFORE USE. Check the hydraulic jack for damage and loose fittings. If in doubt, do not use. Have damaged parts repaired or replaced by your CLARKE dealer. EVERY 6 MONTHS Oil all joints, linkages and front wheel hubs and apply grease to the caster bearings.
Trapped In The lifting System If any of these remedies fail to restore your jack, consult your Clarke dealer For Spare Parts and Servicing, please contact your nearest dealer, or CLARKE International, on one of the following numbers. PARTS & SERVICE TEL: 020 8988 7400...
Page 7
The CE mark was first applied in: 2005 Product Description: 2 Ton Garage Trolley Jack Model number(s): CTJ2001G Serial / batch Number: Current Manufacture. Date of Issue: 09-07-08 Signed A.C. AIKEN Senior Manager Clarke International. CTJ2001G Trolley Jack DOC-RV1.doc Page 1 of 1...
Need help?
Do you have a question about the CTJ2001G and is the answer not in the manual?
Questions and answers