INTRODUCTION Thank you for purchasing this CLARKE trolley jack. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service.
9. Do not try to lift more then the rated load for the jack. 10. Do not use the jack if an oil leak is apparent. Consult your Clarke dealer. 11. Consult the vehicle handbook to determine the correct lifting points.
5. Inspect the jack for distortion of components and security of all nuts and bolts. If in doubt, do not use. Have damaged parts repaired or replaced. If necessary, consult your CLARKE dealer. The jack is now ready to use.
• The oil should be almost level with the bottom of the filler hole • Oil can be topped up using Clarke Hydraulic Oil (p/n 3050830 1 litre). 3. Replace the filler plug/cover plate and bleed any air from the system.
If any of these remedies fail to restore your jack, consult your Clarke dealer. SPARE PARTS The Operating Lever, Rubber Puck, Rear Castor assembly are available as user serviceable parts from your Clarke dealer, or Clarke International Parts...
Need help?
Do you have a question about the CTJ2000LPB and is the answer not in the manual?
Questions and answers