Related Manuals for Clarke CTJ2CB
Summary of Contents for Clarke CTJ2CB
- Page 1 HYDRAULIC TROLLEY JACK MODEL NO: CTJ2CB & CTJ2BMC PART NO: 7623207 & 7623209 OPERATION & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC 1117- ISS1...
-
Page 2: Specification
INTRODUCTION Thank you for purchasing this CLARKE Trolley Jack. This manual cover s the CTJ2CB and the CTJ2BMC which is supplied in a blow moulded case. Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service. -
Page 3: Safety Precautions
9. Do not try to lift more then the rated load for the jack. 10. Do not use the jack if an oil leak is apparent. Consult your Clarke dealer. 11. Consult the vehicle handbook to determine the correct lifting points. -
Page 4: Before Use
2. Inspect the jack for oil leaks or any sign of damage. If in doubt, do not use. Should any defects be apparent, have the jack repaired by your CLARKE dealer. 3. Check the piston for dirt, rust etc which can damage the piston and internal components. -
Page 5: Maintenance
• The oil should be almost level with the bottom of the filler hole • Oil can be topped up using Clarke Hydraulic Oil (p/n 3050830 1 litre). 3. Bleed any air from the system as described on page 6 and replace the filler plug and cover plate. -
Page 6: Bleeding Air From The System
Return to your Clarke dealer for completely faulty. repair. If any of these remedies fail to restore your jack, consult your Clarke dealer. SPARE PARTS The following user serviceable parts are available from your Clarke dealer, or Clarke International Parts Department: Carrying Handle, Operating Lever,... -
Page 7: Declaration Of Conformity
DECLARATION OF CONFORMITY...
Need help?
Do you have a question about the CTJ2CB and is the answer not in the manual?
Questions and answers