Subscribe to Our Youtube Channel
Related Manuals for Clarke STRONG-ARM CTJ2B
Summary of Contents for Clarke STRONG-ARM CTJ2B
- Page 1 HYDRAULIC TROLLY JACK MODEL NO: CTJ2B, CTJ2MB PART NO: 7623035, 7623040 OPERATION & MAINTENANCE INSTRUCTIONS 05/08...
-
Page 2: Specifications
INTRODUCTION Thank you for purchasing this CLARKE Hydraulic Trolly Jack Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service. -
Page 3: Safety Precautions
8. NEVER exceed the rated load for the jack (See “Specifications” on page 2.). 9. Do not use if an oil leak is apparent. Consult your Clarke dealer. SPARE PARTS The following user serviceable parts are available from your Clarke dealer, or Clarke International Parts Department. -
Page 4: Operation
OPERATION NOTE: Where included, the carrying handle should be attached by clipping it over the two large nuts at the main arm pivot. see photograph on the front cover. Ensure the load is chocked and stable and on firm level ground 1. -
Page 5: Maintenance
Store in a dry place, with the ram fully retracted, where it cannot be attacked by the elements. If stored for long periods, inspect at least once a year, clean and re-oil. For servicing, contact your CLARKE dealer, or CLARKE International Service Department. -
Page 6: Troubleshooting
1. Open release valve and pump handle fully, 6 or 7 times to Full 2 Tonne Trapped In The purge air. System 2. Close release valve and try again. If any of these remedies fail to restore your jack, consult your CLARKE dealer... -
Page 7: Declaration Of Conformity
DECLARATION OF CONFORMITY...
Need help?
Do you have a question about the STRONG-ARM CTJ2B and is the answer not in the manual?
Questions and answers