Accessories; Safety Considerations - EAS Electric M-Thermal Biblock Instruction Manual

■ No heat pump operation, backup heater or boiler only.
(*) The models have a frozen prevention function using the heat
pump and back up heater to keep the water system safe from
freezing in all conditions. In case accidental or intentional power
shutdown is likely to happen, we recommend to use glycol(-Refer
to 9.3 Water pipework caution: "Use of glycol").
■ Capacity test
If want to do the capacity test, please contact the manufacturer.
1.2 Scope of this manual
This installation & ow ner's man ual describes the procedures for
installing and connecting all monobloc outdoor unit models.
1.4 Operating range
Operationg range of indoor unit
Outlet water (Heating mode)
Outlet water (Cooling mode)
Domestic hot water
Ambient temperature
Water pressure

2 ACCESSORIES

Name
1. Indoor unit installation &
owner's manual (This book)
2. Y-shape filter
3. Mounting bracket
4.User interface kit (digital
remote controller)
5. M8 expansion screws
6.T5 temperature sensor for
domestic hot water tank
7.Copper nut
8. User interface installation
& owner's manual
+25 ~ +60℃
+5 ~ +25℃
+40 ~ +60℃
-20 ~ +46℃
0.3~3bar(g)
Shape Quantity
1
1
1
1
5
1
1
1
2

3 SAFETY CONSIDERATIONS

The precautions listed here are divided into the following two types.
Both cover very important topics, so be sure to follow them carefully.
Meanings of DANGER, WARNING, CAUTION and NOTE symbols.
DANGER
Indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury. It may also
be used to alert against unsafe practices.
NOTE
Indicates situations that may result in equipment or
property-damage accidents only.
DANGER
■ Before touching electric terminal parts, turn off power switch.
■ When service panels are removed, live parts can be easily
touched by accident.
Never leave the unit unattended during installation or servicing
when the service panel is removed.
■ Do not touch water pipes during and immediately after operation
as the pipes may be hot. Your hand may suffer burns. To avoid
injury, give the piping time to return to normal temperature or be
sure to wear proper gloves.
■ Do not touch any switch with wet fingers. Touching a switch with
wet fingers can cause electrical shock.
■ Before touching electrical parts, turn off all applicable power
supply.
WARNING
■ Tear apart and throw away plastic packaging bags so that
children will not play with them.
Children playing with plastic bags face danger of death by
suffocation.
■ Safely dispose of packing materials. Packing materials, such
as nails and other metal or wooden parts, may cause stabs or
other injuries.
■ Ask your dealer or qualified personnel to carry out installation
work.
Do not install the machine by yourself.
Improper installation may result in water leakage, electric
shocks or fire.
■ Perform installation work in accordance with this installation
manual.Improper installation may lead to water leakage,
electric shocks or fire.
■ Be sure to use only the specified accessories and parts for
installation work.
Failure to use the specified parts may result in water leakage,
electric shocks, fire, or the unit falling.
■ Install the unit on a foundation that can withstand its weight.
■ Insufficient strength may result in the fall of equipment and
causing injury.
■ Carry out the specified installation work in consideration of
strong winds, hurricanes, or earthquakes.
Improper installation work may result in accidents due to fall of
equipment.
V.1