Accessories - EAS Electric VRV Installation And Owner's Manual

• Do not install the air conditioner in the following places:
1) Where there is oil or gas, such as the kitchen. Otherwise, the
plastic parts may age, fall off or water may leak.
2) Where there are corrosive gases (such as sulphur dioxide).
Corrosion in the copper pipes or welded parts may cause the
refrigerant to leak.
3) Where there are machines emitting electromagnetic waves.
Electromagnetic waves may interfere with the control
system, causing the unit to malfunction.
4) Where there is a high salt content in the air. When exposed
to air with a high salt content, the mechanical parts will
experience accelerated
compromise the service life of the unit.
5) Where there are major voltage fluctuations. Operating the
unit using a power supply system that has large voltage
fluctuations will reduce the service life of the electronic
components, and cause the unit's controller system to
malfunction.
6) Where there is a risk of leakage of flammable gases.
Examples are sites that contain carbon fibres or combustible

Accessories

Verify that the air conditioner includes the following accessories. Please keep the additional accessories properly.
Name
1. Screws, ST3.9x25
2. Plastic expansion tubes
3. Winding belt
4. Water discharge pipe
5. Wall conduit cover
6. Manual
7. Brass nuts
Accessories to purchase locally
Code Name Appearance
1 Copper pipe
PVC pipe for
2
water discharge
Insulation
3 casing for
piping
•
ageing which will severely
Appearance
Dimensions
Choose and purchase copper pipes that correspond to
the length and size calculated for the selected model
in the installation manual of the outdoor unit and your
actual project requirements.
Outer diameter: 37-39 mm, inner diameter: 32 mm
The inner diameter is based on the diameter of the
copper and PVC pipes. The thickness of the pipe
casing is 10 mm or more. Increase the thickness of
the casing (20 mm or thicker) when the temperature
exceeds 30°C or the humidity exceeds RH80%.
dust in the air, or where there are volatile combustibles (such
as diluent or petrol). The above gases may cause explosion
and fire.
7) Do not touch the fins of the heat exchanger as this may lead to
injury.
8) Some products use the PP packing belt. Do not pull or tug on
the PP packing belt when you transport the product. It will be
dangerous if the packing belt breaks.
9) Note the recycling requirements for nails, wood, carton and
other packaging materials. Do not discard these materials
directly as these may lead to bodily harm.
10)Tear up the packaging bag for recycling to prevent children
from playing with it, and leading to suffocation.
11)The appliance shall not be installed in the laundry.
• When the product is used for comercial application. This
appliance is intended to be used by expert or trained users in
shops, in light industry and on farms, or for commercial use by lay
persons,the sound pressure level is below 70 dB(A).
Qty
8
8
1
1
1
1
1
2
Function
Set installation board
This manual
Pipe connections
Qty Note
To purchase based Use to connect
on actual project indoor refrigerant
requirements. piping.
To purchase based Use to discharge
on actual project condensed water
requirements. from the indoor unit.
To purchase based
Protect piping from
on actual project
condensation.
requirements.
V.1