Operation With Wifibox - ProLights SMARTBATIP User Manual

12

3.12 OPERATION WITH WIFIBOX

This mode allows you to wirelessly connect more units SMARTBATIP, all managed through a unit WIFIBOX
(sold separately). For the unit WIFIBOX, transmitter signal, will set the input signal, WIFI or DMX. For the
configuration of the devices refer to the manual of WIFIBOX available on "www.musiclights.it".
WIFIBOX: SIGNAL INPUT
1) WIFI (with SmartColors App)
2) DMX (with a DMX Controller)
WIFIBOX: TRANSMITTER MODE
(type of channel for data wireless
communication)
1) Manual Channel
2) Auto Channel
SMARTBATIP: RECEIVER MODE
1) drCH --> WIFIBOX sets on Manual Channel
2) drAU --> WIFIBOX sets on Auto Channel
Note: To work in the right way, all SMARTBATIP must be con gured with the same DMX address/mode.
SMARTBATIP
Fig.9 - Configuration with WIFIBOX