Land Pride GB25 Series Operator's Manual page 19

Table of Contents

Advertisement

Section 1: Assembly & Set-Up
39290
Hook-up to Quick Attach Hitch Plate
Refer to Figure 1-10:
!
DANGER
To avoid serious injury or death:
A crushing hazard exists when hooking-up and unhooking the
attachment. Do not allow anyone to stand between attachment
and power machine while approaching or backing away from
the attachment. Do not operate hydraulic controls while
someone is near the power machine and/or attachment.
!
WARNING
To avoid serious injury or death:
Lightweight power machines may need weight added to the
rear to maintain steering control and prevent forward
tipping or side tipping caused by a heavy front load. Consult
your power machine Operator's Manual to determine
proper weight requirements and maximum weight
limitations.
Check hitch fit-up frequently. An improper fit-up can cause
the attachment to come loose from the loader hitch plate
and fall.
6/17/21
Table of Contents
Hook-up to Quick Attach Hitch Plate (Shown with Grapple Attached)
Figure 1-10
This Grapple Bucket is designed for attaching to a tractor
loader with an attached Universal Quick-Attach hitch
plate.
1.
Check for and remove any debris in the front loader
and grapple hitch point areas before hooking-up to
the Grapple Bucket.
2. Drive tractor slowly up to the bucket hitch plate
making sure the loader hitch plate is parallel with the
bucket's top angle bars.
3. Tilt top of loader hitch plate slightly forward.
4. Place top of loader hitch plate under the grapple's top
angled bars and slowly raise loader hitch plate until
the loader hitch plate is seated under the top angle
bars.
5. Tilt top of loader hitch plate back until bucket hitch
plate makes full contact with the face of the loader
hitch plate.
6. Push lock handles on loader hitch plate down. Make
sure the pins go through the bottom slots in the
bucket hitch plate and lock handles are locked down.
7.
Complete customer supplied hydraulic hook-up. See
"Hook-up Customer Hydraulics" on page 16.
Series: GB25, GBE25, and GBE30 Grapple Buckets 380-192M
15

Advertisement

Table of Contents
loading

Table of Contents