Icom IC-M423GE Instruction Manual page 58

7
DSC OPERATION
■ Making DSC calls
D Making a Test Acknowledgement call (continued)
Manual ACK:
q Enter "TEST ACK" in the DSC CALLS menu.
➪ DSC Calls
MENU
(Push [MENU].)
• If no Test call has been received, the "TEST ACK" item will not
be displayed.
• Push [EXIT] to return to the normal operating mode.
• Push [BACK] to return to the previous screen.
w Select a desired Test call to reply to, using Dial or [Y]/[Z],
then push Dial or [ENT].
48
➪ Test ACK
(Rotate Dial, then push [ENT].)
e The Test ACK confirmation screen is displayed.
Push [CALL] to make an acknowledgement call.
r While transmitting the acknowledgement call, the screen
shown below is displayed, and then returns to the normal
operating mode.