Related Manuals for Ecostrad Sunglo
Summary of Contents for Ecostrad Sunglo
- Page 1 Sunglo Infrared Heater with Remote Ratings: AC 220-240V, 50/60Hz, 2000w, Class I, IP65 Rating...
- Page 2 Symbols Warning This symbol indicates a hazard with an average risk level which, if not avoided, could result in serious injury or death. Warning of electrical voltage This symbol indicates danger to the life and health of persons due to electrical voltage.
-
Page 3: Table Of Contents
Contents About the Device Technical Information Warnings & Precautions Installation Installation Restrictions 4-2 Fixings 4-3 Mounting Instructions 4-4 Installation with Stand Operation Power Switch 5-2 Remote Control 5-3 Insert Batteries Maintenance Cleaning Troubleshooting Warranty 10 | Disposal Ecostrad_Sunglo_V1.2_25062021... -
Page 4: About The Device
1 | About the Device The ECOSTRAD SUNGLO infrared heater contains a ‘Helen lamp’ reflector heating system that provides even heat distribution. The energy consumption of this infrared heater is 30 - 40% more efficient in comparison to traditional electric alternatives. - Page 5 7. Do not use the heater near flammable objects such as furniture, pillows, bedding, paper, clothes, etc. Curtains must be kept at least 1m from the front of the heater, although for safety, any curtains or drapes should be kept toward the heater’s rear or sides.
-
Page 6: Installation
22. Parts of the heater may exceed 200 °C. Contact with the heating tube, reflector, or metal parts near the heating tube, may cause severe burns. Do not let bare skin come into contact with the hot surfaces of the heater. 23. -
Page 7: Fixings
8. Keep the supply cord away from the body of the heater, which will get hot during use. 9. If the heater is to be used outside, a weatherproof outlet is recommended. 10. The heater must be installed on the mounting bracket provided. -
Page 8: Mounting Instructions
4 – 3 | Mounting Instructions Important – Ensure the cable is well secured so that it does not trail into the heated area or come into contact with the reflector. The cable can be fixed to the metal mounting bracket behind the heater with plastic zip ties. The mounting bracket provided with the heater has been specifically designed to allow the product to be fitted to a wall or ceiling. -
Page 9: Installation With Stand
Use the power button on the right side of the heater to switch the device on and off. 5 – 2 | Remote Control All Ecostrad Sunglo heaters and their remote controls operate on the same frequency, allowing multiple heaters to be controlled with one remote. -
Page 10: Maintenance
6 | Maintenance Careful and regular maintenance of the heater according to the instructions below is required to maximise the longevity and efficiency of your appliance. • Check the cleanliness of the heater at least once a month. If needed, follow the cleaning instructions below. -
Page 11: Troubleshooting
Contact the retailer to arrange a replacement unit. 9 | Warranty The Ecostrad Sunglo is supported by a 2-year guarantee covering the heater body and all electronic components, including the bulb. Within the stated period, starting from the date the customer receives their unit, Ecostrad guarantee to repair or replace the unit where a fault is due to defects in materials or manufacturing. -
Page 12: Disposal
Ecostrad. Photographs of the installation may be required to determine correct placement. If the unit has been hardwired, an invoice may be required to confirm the work was carried out by a qualified professional.
Need help?
Do you have a question about the Sunglo and is the answer not in the manual?
Questions and answers