Subscribe to Our Youtube Channel
Related Manuals for Ecostrad Cirrus
Summary of Contents for Ecostrad Cirrus
- Page 1 Model: Ecostrad Cirrus with Remote Model no.: SH24NMCR 2400 W Ratings: 220 V – 240 V; 50 Hz; Class I; IP65...
- Page 2 The Ecostrad Cirrus is a versatile infrared heater that provides radiant infrared heat with a soft orange glow. Suitable for wall and ceiling mounting, the Cirrus with its carbon filament element delivers heat that is strong enough to be effective outdoors but gentle enough for prolonged use in hard-to-heat indoor areas. .
- Page 3 Remote Control Allen Key Installation: The Cirrus is suitable for wall or ceiling mounting. The instructions below apply to both types of installation. IMPORTANT: The heater must be installed at least 1.8m from the ground and at least 50cm from adjacent surfaces.
- Page 4 PARTS DESCRIPTION PART NAME PART NAME Lower L Bracket Expansion Bolt M6*70 Main Switch Upper L Bracket Control Panel Washer Spring Washer Screw M6*8 Screw Nut M6 Allen Key Screw M6*16 Remote Control...
- Page 5 Using the Heater 1. Plug the unit into a socket. Make sure the power supply is the same as rated: 220 – 240 V. 2. Switch the heater on via the large switch on the left side. The mark “-” in the digital display will start flashing to show the heater is on standby.
Need help?
Do you have a question about the Cirrus and is the answer not in the manual?
Questions and answers