Table of Contents
Advertisement
Step Action
1
Remove the ramps from the
pallet.
2
Remove the 2 x M6x90 bolts
from the pallet.
3
Fit the lower ramps to the
ramp brace.
4
Fit the upper ramps to the
lower ramp assembly.
P2T 2-Knife Trimmer
Issue 1b, June 2018
Information
See
Figure B:10.
•
Remove the retaining bolts from the
upper ramps, lower ramps and the
ramp brace.
•
Remove the upper ramps, lower
ramps and the ramp brace from the
pallet.
See
Figure B:10.
and
Figure B:11.
The M6x90 bolts are located in the pallet
in the cut-outs that locate the upper
ramps.
You will need the M6x90 bolts to lock the
upper ramps to the pallet in a later step.
See
Figure B:10.
and
Figure B:11.
See
Figure B:10.
and
Figure B:11.
Step Action
5
Fit the upper and lower ramp
assembly to the pallet.
Page B-7
Information
See
Figure B:10.
and
Figure B:11.
•
Fit the ends of the upper ramps in the
cut-outs in the pallet.
B
•
Lock the ramps to the pallet with the
M6x90 bolts (B).
APPENDIX B - Uninstall the P2T
Prepare the Pallet
Advertisement
Chapters
Table of Contents
