Unload The P2T - Watkiss P2T Unpacking And Installation Instructions

2.2

Unload the P2T

Figure 2:6. Ramps and ramp brace stored on the pallet. P2T not shown.
Figure 2:7. Ramps and ramp brace fitted to the pallet
P2T 2-Knife Trimmer
Issue 1b, June 2018
Upper ramp
Metal channel
Lower ramp
Ramp brace.
Needs 8mm Allen key.
A
Cut-out to locate the
upper ramp
Retaining bolt
M6x90 bolt
Upper ramp
B
Figure 2:8. Bracket assemblies rotated. P2T not shown.
Lower ramp
Tools:
• 8mm Allen key
Ramp brace
• 2 x 17 mm spanners
• 17 mm socket
• Ratchet handle - supplied with the BLM. See
Pallet
Page 2-5
Warning: The installed weight of the P2T 2-Knife Trimmer is 300
kg (660 lb). You must follow good Health and Safety procedures
when you lift or move the equipment.
Retaining bolt
Retaining bolt
Section 1.6.1.
CHAPTER 2 - Unpack the P2T
Unload the P2T