Watkiss P2T Unpacking And Installation Instructions page 31

Figure 3:13. Fit item  to the bottom chassis rail of the BLM
Figure 3:14. Pivot bracket, item 
P2T 2-Knife Trimmer
Issue 1b, June 2018
Pivot clamp bracket
Mains power input
P2T
Pivot bracket
fitted to the P2T
Step Action

1 Fit the docking latch
assembly to the BLM
outfeed book support.

Page 3-7
Information
Item  , Figure 3:8.
The docking latch assembly engages with
the bottom chassis rail of the BLM.
See Figure 3:9.
The docking latch assembly is held in
position by 2 x M5x12 cap-head screws with
shakeproof washers.
CHAPTER 3 - Prepare the BLM
Fit the Installation Hardware to the BLM