Watkiss P2T Unpacking And Installation Instructions page 48

Step Action
4 Engage the lower set of keyhole
slots with the fixing studs on the
trimmer.
5 Connect the power cable.
P2T 2-Knife Trimmer
Issue 1b, June 2018
Information
See Figure 4:24.
Lift the stacker approximately 25mm
and push onto the fixing studs.
Lower the stacker to engage with the
fixing studs.
Page 4-14 CHAPTER 4 - P2T Installation
Fit the Covers to the P2T and to the BLM