Prepare The Blm - Watkiss P2T Unpacking And Installation Instructions

Prepare the BLM

CHAPTER 3
3.1 Remove Covers from the BLM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
3.2 Remove the Outfeed Stacker from the BLM . . . . . . . . . . . . . . . . . . . 3-4
3.3 Fit the Installation Hardware to the BLM . . . . . . . . . . . . . . . . . . . . . . 3-5
3.3.1 Fit the Mounting Brackets and Outfeed Covers . . . . . . . . . . . . . . 3-5
P2T 2-Knife Trimmer
Issue 1b, June 2018
IMPORTANT:
• Make sure you have read
tion 1.8 - BLM Installation
• Make sure you have the correct installation hardware for the P2T and that
you have fitted the required modifications to the BLM.
Page 3-1
Section 1.7 - P2T Installation Hardware
Requirements.
CHAPTER 3 - Prepare the BLM
and Sec-