Prepare The Pallet - Watkiss P2T Unpacking And Installation Instructions

B.3

Prepare the Pallet

Figure B:10. Ramps and ramp brace stored on the pallet. P2T not shown.
Figure B:11. Ramps and ramp brace fitted to the pallet
P2T 2-Knife Trimmer
Issue 1b, June 2018
Upper ramp
Metal channel
Lower ramp
Ramp brace.
Needs 8mm Allen key.
A
Cut-out to locate the
upper ramp
Retaining bolt
M6x90 bolt
B
Upper ramp
Figure B:12. Bracket assemblies rotated.
Tools:
Lower ramp • 8mm Allen key
• 2 x 17mm spanners
• 17mm socket
Ramp brace
• Ratchet handle - supplied with the BLM. See
Pallet
Page B-6
Retaining bolt
Retaining bolt
Section 1.6.1.
APPENDIX B - Uninstall the P2T

Prepare the Pallet