Advertisement
Quick Links
ASSEMBLY INSTRUCTIONS
BASKENRIDGE
VINYL GATE KIT W/
FENCE WINGS
Approximate assembly time
Want to see a video on how to
WWW.ZIPPITY-OUTDOOR.COM
WWW.ZIPPITY-OUTDOOR.COM
(51⅜"W X 36"H)
60 MIN
assemble this product?
Scan the QR code
ASSEMBLY
INSTRUCTIONS
ZP19038
ZP19038
VER. 021621
1
Advertisement
Related Manuals for Zippity BASKENRIDGE
Summary of Contents for Zippity BASKENRIDGE
- Page 1 ZP19038 ASSEMBLY INSTRUCTIONS BASKENRIDGE ASSEMBLY INSTRUCTIONS VINYL GATE KIT W/ FENCE WINGS ZP19038 (51⅜”W X 36”H) 60 MIN Approximate assembly time Want to see a video on how to assemble this product? Scan the QR code WWW.ZIPPITY-OUTDOOR.COM VER. 021621 WWW.ZIPPITY-OUTDOOR.COM...
- Page 2 If you experience any further trouble with your product, please contact our customer service department. parts.nychbrands.com support@zippity-outdoor.com 704-892-5222 877-234-6196 Customer service agents are available to take calls weekdays from 9am- 5pm EST. If you call outside of business hours, please leave a voicemail.
- Page 3 Installing fence panels on both sides of your gate is ideal in all situations. If this is not possible because of space restrictions, please contact us for alternative solutions. Use joiner clips (included in ZP19037) to attach the gate to the fence panels. WWW.ZIPPITY-OUTDOOR.COM...
- Page 4 ZP19038 ASSEMBLY INSTRUCTIONS Baskenridge Vinyl Gate Kit w/ Fence Wings (51 ” W x 36” H) 36 in 36 in Ground WWW.ZIPPITY-OUTDOOR.COM...
- Page 5 ⅞” x 1½” x 44” 1½” x 1½” x 36” ¾” White Self-Drilling Stainless Steel Screw (40) L Bracket (4) Gate Post (2) Picket (8) ⅟₁₆” Drill Bit (1) ⅞” x 1½” x 34” ¼” x 1¼” x 31¼” WWW.ZIPPITY-OUTDOOR.COM...
- Page 6 The pickets will click into place. Fasten the gate rail to the gate posts using (4) ¾” white self-drilling stainless steel screws. Align Insert (8) Pickets into the routed holes in the gate rail until they click into place. WWW.ZIPPITY-OUTDOOR.COM...
- Page 7 Gate Hinge gate posts. The post caps will lock into Holes should be about ¼” from the edge of the rail place. as shown. Fasten each gate hinge with (2) 1/8” Black Self-Drilling Stainless Steel Screws (I). ¼” WWW.ZIPPITY-OUTDOOR.COM...
- Page 8 Insert the posts down self-drilling stainless Align through (2) Rails (B). steel screws. Repeat Align the pre-drilled for the second gate holes in the rails with wing. the pre-drilled holes in the posts. Align Note: Orient the posts as illustrated WWW.ZIPPITY-OUTDOOR.COM...
- Page 9 (or something to protect the top of equivalent) as illustrated. Add water to the posts, and gently loosen the soil if necessary. hammer each gate wing equally into the ground until the bottom rails are about 2” above the ground. WWW.ZIPPITY-OUTDOOR.COM...
- Page 10 Use a 1¾” diameter auger bit (commonly used for planting tulips) as illustrated ($15-$20 on Amazon.com). Drill a hole about 12” to 16” deep at the desired location, and fill the holes with water as illustrated. Push the fence wings into the holes. WWW.ZIPPITY-OUTDOOR.COM...
- Page 11 INSTALL GATE STEP 6: STEP 6.1 Align the gate hinges with the rails as illustrated. Mark and pre-drill two holes for each hinge with the ⅟₁₆” drill bit and fasten both hinges with (4) 1/8” black self-drilling stainless steel screws. WWW.ZIPPITY-OUTDOOR.COM...
- Page 12 INSTALL FENCE PANELS STEP 7: STEP 7.1 Follow the instructions included in your Baskenridge Fence Kit (ZP19037). Use the joiner clips provided in the fence kit to attach the gate to the fence. WWW.ZIPPITY-OUTDOOR.COM...
- Page 13 ZP19038 ASSEMBLY INSTRUCTIONS 6935 Reames Rd. Ste. K. Charlotte, NC 28216 support@zippity-outdoor.com 704-892-5222 877-234-6196 WWW.ZIPPITY-OUTDOOR.COM WWW.ZIPPITY-OUTDOOR.COM...