CraftBot FLOW GENERATION IDEX User Manual page 30

FMS
You can change the FMS sensitivity of Head 1 and Head 2.
Select the Other settings menu and turn on or off the
FMS E-mail system. If a filament jam is detected while
printing, the system will send a notification to your
configured E-mail address.
Sound
You can change the sounds of printer. You can separately
enable Event sounds and Button sounds.
Use the reset button to change back to the factory
values.
Inside the Event sounds menu you can choose from 20
ringtones for different printer
There are two types of lights:
• Interion LED lighting
• LCD display backlight
Move the slider from left to right to adjust the brightness
of the light.
Logo color
Here you can adjust the color of the backlight of the
Craftbot logo on the printer.
You can assign four statuses to the logo light:
• Stand by
• Error
• Printing
•
Success
Fan
Multiple sliders are displayed on the new screen to
control the power of the fans.
There are 4 type of fans:
• Object fan
• Extruder fan
•
Case fan
•
Dome fan
statuses.Light
IDEX USER MANUAL
30