CraftBot FLOW GENERATION IDEX User Manual page 28

Network
Select the Settings menu
touch the Network icon.
On the main page you can see some information about
the network:
•
IP adress
• Subnet mask
• Gateway
• DNS
•
Hostname
•
MAC
Select the Ethernet or the WiFi network. The printer
can be either on Ethernet or WiFi. If you select the WiFi
option the printer will turn off Ethernet and vice versa.
You can chose Static IP or DHCP. If DHCP is selected, the
printers must be configured.
WiFi
If you selected the WiFi option please go to the WiFi
menu on the top of the screen.
The Searching button will list WiFi resources. Select a
suitable one and if you have a password you can enter it
using the keyboard shortcut.
Web config
Here you can reset you username and your password for
the web platform.
USERNAME: admin
PASSWORD: adminadmin
E-mail
Craftbot FLOW Generation printers can send an E-mail
notifiaion if a problem occurred during the print job.
For the E-mail notification to work you have to set up an
E-mail account for sending.
We recommend you use GMAIL. Register an E-mail
account on GMAIL and use its settings for sending
notifications.
Please read this article on how to create a GMAIL
account:
https://support.google.com/mail/answer/56256?hl=en
Please allow access to the GMAIL account for "Less
secure Apps" as follows:
https://support.google.com/a/answer/6260879?hl=en
The FROM: E-mail address should be your new GMAIL
address you just registered.
The TO: email address is the E-mail address where the
printer will send the notification messages.
on the LCD screen and
IDEX USER MANUAL
28