Safe Mode - CraftBot FLOW GENERATION IDEX User Manual

History
If you have any problems with your printer, here you can
see the problems. Please if you have a capital error on
your printer save the report information (Info menu/
Report) and send it to our support team.

5.12. Safe mode

If you have a capital error then a red message appear
on the screen of your printer and the safe mode will be
active. If you see the following messages, some menu is
hiding and just 3 menu is alive.
Alive menus:
• Print
• Settings
•
Info
Please after the red messages:
•
press the Info menu
•
do a Report for our support team
• and send it to our support team.
Red messages with Safe mode:
BED/ HEAD0/HEAD1_OVERTEMP
BED/ HEAD0/HEAD1_UNDERTEMP
BED/ HEAD0/HEAD1_SLOW_HEATING
BED/ HEAD0/HEAD1_THERMAL_RUNAWAY
X0, X1, Y, Z_MOTOR_DRIVER
E0, E1_MOTOR_DRIVER
DOOR_CURRENT
HMI_12V / 24V_CURRENT
HEAD0/HEAD1_12V / 24V_CURRENT
DOME_12V_CURRENT
CASE_12V_CURRENT
PR3_ERRORS
IDEX USER MANUAL
22