note
You cannot change the
aspect ratio when displaying
from a USB device.
Displaying and Adjusting the Image
38
Resizing Video Images
You can resize your images by changing the aspect (width to height)
ratio (depending on your input signal).
Press the
button on the remote control repeatedly to cycle
Aspect
through the available options.
You can also select the
menu. See page 49 for instructions.
Select from one of these
(HDMI images only)
■
Auto
ratio according to the input signal.
(for images sent through the
■
Normal
port only)
Video)
:
and maintains the aspect ratio of the image. Choose this setting to
automatically resize the image and make the best use of the
display area.
Converts the aspect ratio of the image to 16:9. 4:3 ratio
■
16:9:
images are elongated horizontally to fit.
Displays images using the full width of the projection area
■
Zoom:
and maintains the aspect ratio of the image. The image may be
cut off on the top and bottom depending on its aspect ratio.
■
Displays images using the full width of the projection area,
Full:
but does not retain the aspect ratio. 4:3 ratio images are elongated
horizontally.
Displays images as is (aspect ratio and resolution are
■
Native:
maintained). Black bands may appear or images may be cut off,
depending on the resolution.
setting from the projector's Signal
Aspect
options:
Aspect
Automatically sets the best aspect
:
Computer (Component
Displays images using the full projection area
Aspect
button