Initializing Micro-Sd Memory Cards - Yaesu FTM-100DR/DE Operating Manual

Initializing micro-SD memory cards

When using a new micro-SD memory card for the first time with the FTM-100DR/DE,
initialize it by following the procedure below.
Caution
Initializing deletes all the data recorded on the micro-SD memory card. Check the contents of the
micro-SD memory card before initialization.
1
Press and hold
The Setup menu appears.
2
Rotate the DIAL to select [11 SD], then press
The menu list appears.
3
Rotate the DIAL to select [2 FORMAT], then press
.
The format confirmation screen appears.
4
Rotate the DIAL to select [OK?], then press
Initializes the micro-SD memory card.
Tip To cancel initialization, rotate the DIAL to select
[Cancel], then press
After completing initialization, "Completed" appears,
and then the display returns to the menu list screen.
for over one second.
.
Setting Up the micro-SD memory card
.
.
33