Transmitting Gps Location Information - Yaesu FTM-100DR/DE Operating Manual

• Data cable "CT-165" (optional)... When connecting to the RS-232C jack of the
computer
To the transceiver
➀ –
➁ GND
➂ –
➃ –
➄ –
➅ –
➆ TXD (serial data output [transceiver → PC])
➇ RXD (serial data input [transceiver ← PC])
➈ CTS (data communication control)
➉ RTS (data communication control)
Tips
• Make sure to turn off the transceiver before connecting any cables.
• When using the SCU-20 PC connection cable, install the designated driver on the computer.
Download the driver and installation manual from the Yaesu website.

Transmitting GPS location information

1
Turn on the transceiver.
2
Press and hold
The Setup menu appears.
3
Rotate the DIAL to select [9 DATA], then press
The menu list appears.
4
Rotate the DIAL to select [1 COM PORT SETTING],
then press
The detail settings screen appears.
for over one second.
.
Connecting an external device
To the computer
➀ –
➁ TXD (serial data output [transceiver → PC])
➂ RXD (serial data input (transceiver ← PC])
➃ –
➄ GND
➅ –
➆ CTS (data communication control)
➇ RTS (data communication control)
➈ –
.
109