Fujitsu AUXG07KVLA Design & Technical Manual page 154

¢ Specifications
Dimensions and other specifications on the wired remote controller are as follows.
Front view
Size (H × W × D)
Weight
Power
 Wiring specifications
Use
Remote controller cable
¢ Installation
Connect the end of remote controller cable directly to the exclusive terminal block.
Functional earthing
(If necessary)
Remote controller cable
(Non-polar)
NOTES:
• Layout of terminal block and PCB is varies depending on the type of indoor unit.
• Operation may fail if it is connected to the outdoor unit or the terminal block for power sup-
ply.
13-6. Wired remote controller (UTY-RLRY: Optional part)
120
mm
g
V
Cable size
0.33 to 1.25 mm
30
Hole: 9 × 4.5
17
Hole: 6 × 4.5
Side view
Wire type
Non-polar 2-core,
2
Twisted pair
Terminal block
- 148 -
33
23
Hole: 12.5 × 4.5
Rear view
120 × 120 × 17
170
12
Remarks
Use sheathed PVC cable.
Indoor unit PCB
13. Remote controller
Unit: mm