Fujitsu AUXG07KVLA Design & Technical Manual page 115
2-unit multi-split type
Hide thumbs
Also See for AUXG07KVLA:
- Service manual (471 pages) ,
- Manual (403 pages) ,
- Design & technical manual (461 pages)
Table of Contents
Advertisement
Input signal type
External input and output PCB:
The input signal type can be selected.
Signal type (edge or pulse) can be switched by the DIP switch SW302 on the External input and out-
put PCB.
11-2. Wall mounted type (Models: ASYG07KGTB, ASYG09KGTB, ASYG12KGTB,
ASYG14KGTB, ASYG07KETA, ASYG09KETA, ASYG12KETA, ASYG14KETA,
ASYG07KETA-B, ASYG09KETA-B, ASYG12KETA-B, and ASYG14KETA-B)
Edge
- 109 -
The width of pulse must be
longer than 200 msec.
Pulse
11. External input and output
Advertisement
Table of Contents
