EGO POWER+ CSX3000 Operator's Manual page 31

2. Wrap the belt around the climbing harness to fix battery holster in place
(Fig. 20 and 21).
20
Opening 1
3. Attach two rings of the safety strop
to the climbing harness by using
two carabiners (not provided), as
shown below (Fig. 22).
NOTICE:
◾
When climbing the tree, attach the
rings 1 and 2 of the safety strop
to the climbing harness by using
carabiners [not provided] (Fig. 23).
◾
When the tool is in use, detach the ring 2 from the climbing harness, hold the saw
by two hands to perform your cutting (Fig. 24).
23
Ring 1
56V LITHIUM-ION CORDLESS CHAIN SAW — CSX3000/CSX3000-FC
21
Belt
Buckle
22
24
Ring 2
Opening 2
Carabiner
(not provided)
Ring 1
Ring 1
Carabiner
(not provided)
Ring 2
Safety strop
31