EGO POWER+ CSX3000 Operator's Manual page 32

INSTALLING/REMOVING BATTERY PACK
NOTICE:
Fully charge the battery pack before its first use.
To Install (Fig. 25)
1. Align the ribs of the battery pack
with the mounting slots of the
battery holster.
2. Slide the battery pack into the
battery holster until it snaps into
position.
NOTICE:
Make sure that the latch on the
battery holster snaps into place and the
battery pack is secured to the battery holster before beginning operation.
To Remove (Fig. 26)
WARNING:
the location of your feet, children, or pets
when pressing the battery release button.
Serious injury could result if the battery
pack falls. NEVER remove the battery
pack at a high location.
1. Hold the battery pack in the palm of
your hand.
2. Press the battery release button with your thumb; the battery pack will
disengage from the latch.
3. Grasp the battery pack and remove it from the battery holster.
32
56V LITHIUM-ION CORDLESS CHAIN SAW — CSX3000/CSX3000-FC
Always be aware of
25
26
Battery Release Button