EGO POWER+ CSX3000 Operator's Manual page 16

◾
Aggressive or abusive cutting or misuse of the chain saw can cause
premature bar, chain, and/or sprocket wear, as well as a broken chain or
bar, leading to kickback, chain throw or the ejection of material.
◾
Never use the guide bar as a lever. A bent guide bar can cause premature bar,
chain, and/or sprocket wear, as well as a broken chain or bar, leading to kickback,
chain throw or the ejection of material.
◾
Cut only one work piece at a time.
◾
Do not try to catch falling sections or make cuts if the operator is only
attached with one rope. Always use two safety ropes.
◾
During felling operations, lift your hearing protection immediately when
the sawing is complete. It is important that you hear sounds and warning
signals.
◾
If the saw chain is blocked by an object: Switch off the chainsaw, engage
the chain brake and remove the power plug, then remove the object causing the
blockage.
◾
Check chain tension regularly during cutting work. If chain tension is
insufficient: Tension the chain.
◾
The information in this operator's manual is not an alternative to
professional knowledge and experience. If you do not feel sure about
how to operate this product, turn to a person with professional knowledge and
experience.
◾
This product has an increased risk of losing control. Only persons who
have special training in cutting and working technique must operate this
product in a tree. The operator must have safety equipment such as a lift, ropes
and safety harness. Regular chainsaws are recommended for all work at ground
level.
◾
Follow instructions on special cutting and working techniques to
decrease the risk of injury. Do not do work in a tree unless you have
professional training for such work. This training includes safe climbing
techniques and work positions. You must learn how to use equipment such as
harnesses, ropes, belts, climbing irons and carabiners.
◾
When a chain saw is being used, a fire extinguisher should be available.
16
56V LITHIUM-ION CORDLESS CHAIN SAW — CSX3000/CSX3000-FC