EGO POWER+ CSX3000 Operator's Manual page 35

Proper Grip On Handles
◾
Wear non-slip gloves for maximum
grip and protection.
◾
With the saw on a firm, flat surface,
hold the saw firmly with both hands.
◾
Always grasp the front handle with
the left hand and the main handle
with the right hand.
◾
The fingers should encircle the
handle, with the thumb wrapped under the front handle (Fig. 31).
WARNING:
would place your body or arm across the chain line.
WARNING:
trigger switch with your left hand and
hold the front handle with your right hand.
Never allow any part of your body to be in
the chain line while operating a chain saw
(Fig. 32).
WARNING:
is increased if you use the chainsaw with
one hand. If kickback occurs, the saw can
be thrown up in the direction of the operator. The operator can lose control of the saw
and be seriously or fatally injured.
a) Do not cut with the upper quadrant of the bar nose.
b) Never support yourself on the limb being cut.
c) Never attempt to hold falling limbs.
56V LITHIUM-ION CORDLESS CHAIN SAW — CSX3000/CSX3000-FC
Never use a left-handed (cross-handed) grip, or any stance which
Do not operate the
The risk of kickback
31
32
Grip With Thumb Below Handle
Chain Line
35