Table of Contents
Advertisement
Installation Manual – BTS3606A Cabinet Installation
Airbridge BTS3606&3606A CDMA Base Station
Chapter 2 Installing Cabinet Base or Channel Steel
The BTS3606A is outdoor equipment. When it weights more than 800 kg, it must be
installed on a cabinet base. When it weights less than 800 kg, it is installed on the
channel steel.
This chapter introduces how to install the cabinet base and channel steel.
2.1 Introduction to Cabinet Base
The cabinet is mounted on the cement plinth with the help of the cabinet base. The
cabinet base also facilitates the cabling and keeps the rodent outside the cabinet.
2.1.1 Base for BTS3606A Cabinet
Figure 2-1 shows the outline and dimensions of the base. The base is made up of
channel-section steel of 200 mm (8 in.) high. For the convenience of cabling, the
channel-section steel is designed with square outlets.
Figure 2-1 Outline and dimensions of the base for the BTS3606A cabinet
2.1.2 Base for Battery Cabinet
Figure 2-2 shows the outline and dimensions of the base. For the detailed
specifications of the base, see section 2.1.1 "Base for BTS3606A Cabinet".
Chapter 2 Installing Cabinet Base or Channel Steel
Huawei Technologies Proprietary
2-1
- Quick Links:
- Table 1-1 Technical Documents
Hide quick links:
Advertisement
Table of Contents
