Installation Manual – BTS3606A Cabinet Installation
Airbridge BTS3606&3606A CDMA Base Station
This chapter introduces the cables used for deployment of the BTS3606A and their
installation procedures.
5.1 Types of Cables and Related Concepts
This section introduces the cables used for BTS3606A deployment, and concepts of
cable inlet and cable distribution region, and then provides cabling diagrams.
5.1.1 Types of Cables for BTS3606A Deployment
Table 5-1 lists cables used for BTS3606A deployment.
Table 5-1 Cables to be installed for deployment
Type of cable
Jumper between CDU/DFU/DDU
and the front inlet of the cabinet
Jumper between the inlet of the
cabinet and the feeder
RF cable
RF cable between
CDDU/CHPA/CTRM
RF cable between
CDDU/CMPA/CMTR
75Ω E1
Transmission
120Ω E1
cable
100Ω T1
Chapter 5 Installing Cables
Description
Huawei Technologies Proprietary
Color
Black
Black
Black
Black
White
White
White
5-1
Chapter 5 Installing Cables
Specification
1/4 in.
DIN connectors on
both ends of the cable.
The DIN-male
connector connects to
the CDU/DFU/DDU.
1/2 in.
Din connector on both
ends of the cable.
1/4 in.
The two ends of a RF
cable are DIN
connectors. The
external connector is a
DIN-female
connector.
1/4 in.
The two ends of a RF
cable are DIN
connectors. The
external connector is a
DIN-female
connector.
75Ω coaxial cable
120Ω twisted pair
100Ω twisted pair