Quick Dial Button Settings; Timing Settings - Fasttel Wizard Elite IP Instruction Manual

Domain: if empty, the SIP server field will be used.
Authentication ID and Password must match those given in the SIP server.
Server address and server port: enter the data for the external SIP server with which the door
intercom is to be integrated.
Registration status: Here you can see whether the doorphone has been registered successfully or
not. Attention: do not refresh itself after changing data! Push F5 and continue for page refresh.
Detect DTMF: for maximum compatibility, leave all these check‐marked.
Echo suppression options: it is best to leave this unchanged.
Click apply to confirm the changes.
3.6 Quick Dial Button Settings
This is used to determine which of the recipients you just created in the Phone directory must be
called when a button is pressed.
This page is licence‐related: only 1 button is visible here because a door intercom with 1 button was
purchased.
User name: choose the recipient who is to be called first here. This must be created under Phone
Directory. Up to 10 numbers are possible.
When a recipient does not answer the call, the next recipient will be called.
When a call is launched outside the time profile that is linked to a recipient, the next recipient that
does fall within the time profile is chosen automatically.
The number of buttons that appears depends on the licence that was purchased.
3.7 Timing Settings
Forward time out: indicates the time when a subsequent recipient is called after the previous one
does not answer the call.
Max Call duration: Enter here in seconds the maximum duration of a conversation.
DTMF hangup: this code will force the call to end.
Edition 2.1 pg.7