Advertisement
Quick Links
Instruction manual
FT600W IP monitor
(From softwareversion 113.78.6.23)
(only for Wizard Serie+FT600SIP but not for the FT600KIT)
Fasttel reserves the right to change the content without prior notice.
Fasttel België, Klipsenstraat 18A, 9160 Lokeren. Tel +32 (0)9 244 65 20
info@fasttel.be
Fasttel Nederland, Heiligenboom 3, 5066 CB Moergestel. Tel +31 (0)13 513 65 14
info@fasttel.nl
Advertisement
Related Manuals for Fasttel FT600W
Summary of Contents for Fasttel FT600W
- Page 1 (only for Wizard Serie+FT600SIP but not for the FT600KIT) Fasttel reserves the right to change the content without prior notice. Fasttel België, Klipsenstraat 18A, 9160 Lokeren. Tel +32 (0)9 244 65 20 info@fasttel.be Fasttel Nederland, Heiligenboom 3, 5066 CB Moergestel. Tel +31 (0)13 513 65 14 info@fasttel.nl...
- Page 2 This guide was created based on Visuals to simplify your work. The FastteL FT600W is an IP monitor that is directly connected to a POE connection of your network. The FT600W must be equipped with at least 2 items: 1 – SIP account with which to register on a SIP server 2 –...
- Page 3 2 – Tabblad Status You cannot change anything on this tab, but this page mainly provides information about some statuses such as: Version number of the software – check our website for the latest version under downloads/software Network connection Account registration. Without “registered” the FT600 will not work 3 –...
- Page 4 4 – Tabblad Account Advanced This data is already preprogrammed in the basic configuration. Do not perform a factory default because then these will be deleted.
- Page 5 5 – Network basic You can choose to give your monitor a fixed IP address. If you don't understand this, it's better to leave it that way. If you go with an IP scanner, you will find the device with the name: smartdoorphones.
- Page 6 7 – Monitor-Time/Lang We have already set this up correctly in the basic configuration. 8 – Phone Call feature We have already set this up correctly in the basic configuration.
- Page 7 9 – Key/Display We have already set this up correctly in the basic configuration. 10-Audio...
- Page 8 The audio settings are so correct. It is possible that the environment gives rise to more or less volume or microphone noise. Then you can adjust it here or on the screen at “Sound” Just skip the Multicast tab 11 – Display Setting We have already set this up correctly in the basic configuration.
- Page 9 12- Phone-Monitor On this page you will enter the camera data that are required to use your intercom to communicate. In all cases except when using the Wizard Apartment you must use the above RTSP link. The correct data can be found on the camera tab of the intercom you are using. As well as the name and password you entered there.
- Page 10 13 – Phone Relay Without Web Relay, we already have all the settings here correctly. If you use a WEB relay, enter the data of the web relay Tabblad XX – Phone Lift & XX – Phone smartliving nothing is done with this configuration...
- Page 11 14 – Local Contacts This page can be of interest if you have multiple internal units. You can then communicate with it. Only enter the name and number of the device. This data must come from your SIP server (FT3000).
- Page 12 15 – Update Basic If there is an Update higher than this, you will find it on our websites under downloads / software 16 – Update Advanced Here you can download existing configurations...
- Page 13 17 – Security Basic We have already set this up correctly in the basic configuration. 18 – Security Advanced Tabblad Security advanced wordt niet gebruikt in deze configuratie Device settings tab is not used in this configuration...