Configuration; Logging In; Status; Network And Time Settings - Fasttel Wizard Elite IP Instruction Manual

3. Configuration

All the settings are configured on 1 web page.
Next to each item you find
appear.
3.1 Logging In
Navigate to the address of the Wizard and enter the default Username and Password. Both are
admin. A second login is user/user. Change both in section "Account".
Change the language if desired.
You will see the configuration menu on the left.
3.2 Status
An overview of the default values of what you will have to configure is given here. Nothing can be
edited in this page itself.
A preview of the camera is also shown here.
Note: if you have entered a user and password under Video settings, this preview can only be seen in
Firefox.
3.3 Network and time settings
IP
The device comes in DHCP mode upon delivery. With a program such as "Advanced IP Scanner"
(http://www.advanced‐ip‐scanner.com/), you can scan the network and if a DHCP server is active,
you will find the device with the name Fasttel000551XXX, and you will see the IP address obtained
(see point 2. Find the Wizard in the Network)
You can also give the device a static IP address.
Attention: after performing a factory reset the Wizard obtains ipaddress 192.168.222.123!
Date and time:
Within Europe, you generally do not need to change anything here. The date and time can be
entered manually here.
However, it is better to use the default NTP server.
3.4 Phone directory
The following is created here:
1. The recipients who must be able to be called.
. Move the mouse cursor on it and some explanation of the item will
Edition 2.1 pg.4