Specifications - JB Systems CAM-LITE 200 Operation Manual

ENGLISH
• When an optical lens is visibly damaged due to cracks or deep scratches, it must be replaced.
• The mains cables must be in impeccable condition and should be replaced immediately when even a small
problem is detected.
• In order to protect the device from overheat the cooling fans (if any) and ventilation openings should be
cleaned monthly.
• The interior of the device should be cleaned annually using a vacuum cleaner or air-jet.
• The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize
light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or
particularly dirty surroundings can cause greater accumulation of dirt on the unit's optics.
• Clean with a soft cloth using normal glass cleaning products.
• Always dry the parts carefully.
Attention: We strongly recommend internal cleaning to be carried out by qualified personnel!

SPECIFICATIONS:

This unit is radio-interference suppressed. This product meets the requirements of the current European and
national guidelines. Conformity has been established and the relevant statements and documents have been
deposited by the manufacturer.
Mains Input:
Internal fuse:
Power connections:
Power consumption (full power):
Daisy chaining:
IP-rating:
DMX connections:
DMX channels used:
LEDs:
Color temperature (CCT):
CRI-factor:
Beam angle:
LED refresh rate:
Ambient temperature:
Size (L x H x D):
Weight:
JB SYSTEMS
®
AC 100V – 240V, 50/60Hz
250Vac / T6.3A
Lockable Power Connector 10A - Neutrik
out)
210 Watt
7pcs (@ 240Vac)
IP20 - indoor
3pin XLR male / female
2, 4 channels
1200pcs 0,2W Cold white + 1200pcs 0,2W Warm white
3000K (WW) → 6300K (CW) - (Full : 4200K)
92 (Full) – 92 (warm white) – 88 (cold white)
110°
800, 1200, 2000, 3600, 12000 and 25000Hz
40°C
see drawings
9kg
9/10
OPERATION MANUAL
® PowerCON compatible (in /
CAM-LITE 200