Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for JB Systems CAM-LITE 200
Summary of Contents for JB Systems CAM-LITE 200
-
Page 3: Before Use
ENGLISH OPERATION MANUAL OPERATION MANUAL ® Thank you for buying this JB Systems product. To take full advantage of all possibilities and for your own safety, please read these operating instructions very carefully before you start using this unit. FEATURES •... -
Page 4: Safety Instructions
• Due to safety reasons it is prohibited to make unauthorized modifications to the unit. Important: Never look directly into the light source! Don’t use the effect in the presence of persons suffering from epilepsy. JB SYSTEMS 2/10 CAM-LITE 200 ®... -
Page 5: Fuse Holder
• Select the desired function with the [ENTER] button. • Use [▲/▼] buttons to change the mode or value. • Once the required mode or value is selected, press the [ENTER] button to select. JB SYSTEMS 3/10 CAM-LITE 200 ®... - Page 6 • Once the correct address shows on the display, press the [ENTER] button to confirm. [DMX Functions > DMX Channel] Used to set the desired channel mode. • Press the [MENU] button to access the different functions in the menu. JB SYSTEMS 4/10 CAM-LITE 200 ®...
- Page 7 • Press the [MENU] button to access the different functions in the menu. • Press the ▲/▼ buttons until the desired function is showing on the display. • Press the [ENTER] button: the display can be turned by selecting [Yes] or [No]. JB SYSTEMS 5/10 CAM-LITE 200 ®...
- Page 8 • Press the [MENU] button to access the different functions in the menu. • Press the ▲/▼ buttons until the desired function is showing on the display. • Press the [ENTER] button: the display shows the firmware version of the projector: A.V x.x JB SYSTEMS 6/10 CAM-LITE 200 ®...
-
Page 9: Overhead Rigging
Use this function when you want to control the projectors by any DMX controller. • Connect the projectors as shown in the drawing below. • First put the projectors in the desired DMX-mode: see the different DMX-charts and choose the one that suits you best. JB SYSTEMS 7/10 CAM-LITE 200 ®... -
Page 10: Stand-Alone Operation
• All screws used for installing the device and any of its parts should be tightly fastened and may not be corroded. • Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally free from any deformation. JB SYSTEMS 8/10 CAM-LITE 200 ®... -
Page 11: Specifications
92 (Full) – 92 (warm white) – 88 (cold white) CRI-factor: Beam angle: 110° LED refresh rate: 800, 1200, 2000, 3600, 12000 and 25000Hz Ambient temperature: 40°C Size (L x H x D): see drawings Weight: JB SYSTEMS 9/10 CAM-LITE 200 ®... - Page 12 ENGLISH OPERATION MANUAL The information might be modified without prior notice You can download the latest version of this user manual on our website: www.jb-systems.eu JB SYSTEMS 10/10 CAM-LITE 200 ®...
Need help?
Do you have a question about the CAM-LITE 200 and is the answer not in the manual?
Questions and answers