Maintenance; Specifications - JB Systems iCOLOR4 Mk2 Operation Manual

Light custom case
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 3
ENGLISH
• DMX-CONFIGURATION OF iCOLOR4 Mk2:
With DIP-switch 10 you can choose the desired DMX-mode:
• DMX MODE 1:
DIP Switch 10 in OFF position.
• DMX MODE 2:
DIP Switch 10 in ON position.
JB SYSTEMS®
OPERATION MANUAL
7/50
iCOLOR4 Mk2
ENGLISH

MAINTENANCE

• Make sure the area below the installation place is free from unwanted persons during
servicing.
• Switch off the unit, unplug the mains cable and wait until the unit has been cooled down.
During inspection the following points should be checked:
• All screws used for installing the device and any of its parts should be tightly fastened
and may not be corroded.
• Housings, fixations and installations spots (ceiling, truss, suspensions) should be totally
free from any deformation.
• When an optical lens is visibly damaged due to cracks or deep scratches, it must be
replaced.
• The mains cables must be in impeccable condition and should be replaced immediately
when even a small problem is detected.
• In order to protect the device from overheat the cooling fans (if any) and ventilation
openings should be cleaned monthly.
• The interior of the device should be cleaned annually using a vacuum cleaner or air-jet.
• The cleaning of internal and external optical lenses and/or mirrors must be carried out
periodically to optimize light output. Cleaning frequency depends on the environment in
which the fixture operates: damp, smoky or particularly dirty surroundings can cause
greater accumulation of dirt on the unit's optics.
• Clean with a soft cloth using normal glass cleaning products.
• Always dry the parts carefully.
• Clean the external optics at least once every 30 days.
• Clean the internal optics at least every 90 days.
Attention: We strongly recommend internal cleaning to be carried out by qualified
personnel!

SPECIFICATIONS

Mains Input:
AC 230V, 50Hz
Fuse:
250V 15A slow blow (20mm glass)
Sound Control:
Internal microphone
DMX connections:
3pin XLR male / female
Lamp:
4x R7S 500W/230V (J Type)
Size:
45 x 27 x 17.5cm
Weight:
7kg
Every information is subject to change without prior notice
You can download the latest version of this user manual on our website: www.beglec.com
JB SYSTEMS®
OPERATION MANUAL
8/50
iCOLOR4 Mk2

Advertisement

Table of Contents
loading

Table of Contents