Vpn; Ipsec - D-Link DSL-G2452GR User Manual

DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band
VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port
User Manual

VPN

In this menu you can configure VPN connections based on IPsec/GRE/EoGRE protocols and create
a PPTP or L2TP server and accounts for access to it.

IPsec

On the VPN / IPsec page, you can configure VPN tunnels based on IPsec protocol.
IPsec is a protocol suite for securing IP communications.
To allow IPsec tunnels, click the ENABLE button. Upon that the Tunnels and Status sections
and the Logging level drop-down list are displayed on the page.
In the Status section, the current state of an existing tunnel is displayed.
From the Logging level drop-down list, select a detail level of messages recorded to the system
log or leave the value specified by default. The Basic value is recommended to establish an IPsec
tunnel faster. To view the log, go to the System / Log page (see the Log section, page 331).
To create a new tunnel, click the ADD button (
!
Setting for both devices which establish the tunnel should be the same.
Figure 126. The VPN / IPsec page.
) in the Tunnels section.
Page 154 of 358
Configuring via Web-based Interface