D-Link DSL-G2452GR User Manual page 276

DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band
VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port
User Manual
Parameter
DND on schedule
Enable session control
Transfer code
Advanced management
Attended transfer
Alert transfer
Move the switch to the right to reject all incoming calls at a certain
time of day. If the switch is moved to the right, the Time period
field is available. Specify the needed period as HH:MM-HH:MM,
where HH:MM is time in 24-hour format.
Session Control
Move the switch to the right to enable session control. Upon that you
will be able to manage voice sessions during a call with the help of
the FLASH key on your phone. (The function should be supported
by your ISP).
Feature code for transferring a call to another phone.
Move the switch to the right to use combination of the FLASH key
and keys of the phone in order to organize three-party calls, manage
sessions and calls.
By default, each action is assigned to a certain key of the phone set.
To change this value, in the line corresponding to the action, select
the needed value from the drop-down list.
Use of FLASH key
The function is enabled. The phone connected to this line has
•
an incoming call in the standby mode and an outgoing call in
the talk mode. It's needed to press the FLASH key, hear the
dial tone, and then press the key corresponding to your
action.
The function is not enabled. The phone connected to this line
•
has an incoming call in the standby mode and an outgoing
call in the talk mode. It's needed:
to press the FLASH key in order to put the second call
◦
on hold and continue the first call,
to hang up the receiver in order to end both calls and
◦
connect the first and second speakers to each other.
Move the switch to the right if you want to transfer calls when a
called party's receiver is lifted.
Move the switch to the right if you want to transfer calls when a dial
tone is heard.
Page 276 of 358
Configuring via Web-based Interface
Description