D-Link DSL-G2452GR User Manual page 94

DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band
VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port
User Manual
Figure 74. The page for creating a new Static IPv4 connection. The IPv4 section.
Parameter
IP address
Subnet mask
Gateway IP address
Primary DNS /
Secondary DNS
Obtain DNS server
addresses
automatically
Primary DNS /
Secondary DNS
Vendor ID
IPv4
For Static IPv4 and IPoA types
Enter an IP address for this WAN connection.
Enter a subnet mask for this WAN connection.
Enter an IP address of the gateway used by this WAN connection.
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
For Dynamic IPv4 type
Move the switch to the right to configure automatic assignment of
DNS server addresses. Upon that the Primary DNS and
Secondary DNS fields are not available for editing.
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
The identifier of your ISP. Optional.
Page 94 of 358
Configuring via Web-based Interface
Description