D-Link DSL-G2452GR User Manual page 337

DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band
VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port
User Manual
To specify additional settings, click the MORE SETTINGS button.
Figure 243. The System / Traceroute page. The additional settings window.
In the opened window, you can specify the following parameters:
Parameter
Maximum TTL value
Number of attempts
Wait time
To restore the default field values, click the DEFAULT SETTINGS button.
After specifying the additional parameters, click the OK button.
To run the check, click the START button. After a while, the results will be displayed on the page.
If you need to interrupt the check, click the CANCEL button (the button is available from the
moment the check starts).
To remove the check result from the page, click the CLEAR button.
Specify the TTL (Time to live) parameter value. The default value is
30.
The number of attempts to hit an intermediate host.
A period of waiting for an intermediate host response.
Page 337 of 358
Configuring via Web-based Interface
Description