D-Link DSL-G2452GR User Manual page 275

DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band
VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port
User Manual
Parameter
SIP ID / Number
Username
Password
PIN code to dial
Enable Display name
Display name
Before the first call
Detection mode
Call waiting
Anonymous call
blocking
Anonymous calling
DND
A number for this line.
The called party sees the specified value as the caller number.
A username for this line which is used to authorize on SIP proxy
server. For most SIP proxy servers the username coincides with the
phone number.
A user password for this line.
Fill in the field to allow the user of the phone to make calls only
after dialing the PIN code.
Move the switch to the right to enable transfer of the caller's name
for outgoing calls.
The name of the caller which will be displayed to the called party.
Caller ID
Move the switch to the right to deliver a phone number to the phones
connected to the FXS ports of the router before the first phone ring
when receiving an incoming call.
From the drop-down list, select an operation mode of the automatic
caller identification function for the phones connected to the FXS
ports of the router.
To disable the automatic caller identification function for the phones
connected to the FXS ports of the router, select the Do not use
value from the drop-down list.
Advanced
Move the switch to the right to accept incoming calls when the line
is busy. To switch between calls, press the FLASH key on the
phone.
Move the switch to the right to reject calls when the calling party
conceals its number.
Move the switch to the right to conceal your number from the called
party.
DND
Do Not Disturb. Move the switch to the right to reject all incoming
calls (the busy tone will be heard).
Page 275 of 358
Configuring via Web-based Interface
Description