D-Link DSL-G2452GR User Manual page 128

DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band
VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port
User Manual
Parameter
MODEM/SIM CARD
SELECTION
Mode
APN
Dial number
Without authorization
Authentication protocol Select a required authentication method from the drop-down list.
Username
Password
Type
Figure 103. The page for creating a new Mobile Internet connection. The PPP section.
11 When several devices are connected to one USB port of the router, it is recommended to use a self-powered USB
hub.
Click the button in order to assign the connection to one of
connected USB modems.
The value of the field specifies the type of the network to which the
router connects. Leave the Auto value to let the router connect
automatically to an available type of network, or select a needed
value from the drop-down list.
An access point name.
A number dialed to connect to the authorization server of the
operator.
Move the switch to the right if your operator does not require
authorization.
A username (login) to connect to the network of the operator.
A password to connect to the network of the operator.
Show icon ( ) to display the entered password.
An IP version which will be used by this connection. Select the
IPv4, IPv6, or Dual value from the drop-down list.
Page 128 of 358
Configuring via Web-based Interface
Description
11
Click the