D-Link DSL-G2452GR User Manual page 129

DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band
VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port
User Manual
Parameter
MTU
Keep Alive
Dial on demand
PPP debug
Figure 104. The page for creating a new
PPP
The maximum size of units transmitted by the interface.
Move the switch to the right if you want the router to
connected to the network of your operator even when the
connection has been inactive for a specified period of time. When
the checkbox is selected, the LCP interval and LCP fails fields
are available. Specify the required values.
Move the switch to the right if you want the router to establish
connection to the Internet on demand. In the Maximum idle time
field, specify a period of inactivity (in seconds) after which the
connection should be terminated.
Move the switch to the right if you want to log
connection debugging.
Mobile Internet
Page 129 of 358
Configuring via Web-based Interface
Description
connection. The Health Check section.
keep you
all data on PPP