D-Link DSL-G2452GR User Manual page 272
Ac1200 mu-mimo wireless dual band vdsl2 router with adsl2+/3g/lte/gigabit ethernet wan support, 2 fxs ports and usb port
Hide thumbs
Also See for DSL-G2452GR:
- User manual (262 pages) ,
- Quick installation manual (24 pages) ,
- Quick installation manual (68 pages)
Table of Contents
Advertisement
DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band
VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port
User Manual
Parameter
Address
Port
Address
Port
Unregister when
switching
Allow call without
registration
Backup route
Backup route port
Address
Port
SIP Outbound Proxy
An IP or URL address of the SIP outbound proxy server.
A port of the SIP outbound proxy server. Unless another setting is
given by your ISP, it is recommended to leave the default value
(5060).
Backup SIP proxy
An IP or URL address of the backup SIP proxy server. The router
uses the backup SIP proxy server in case of no response from the
main SIP proxy server.
A port of the backup SIP proxy server. Unless another setting is
given by your ISP, it is recommended to leave the default value
(5060).
If the switch is moved to the right, upon switching between the main
SIP proxy server and the backup SIP proxy server and backwards,
the router unregisters on the current registration server by sending
special SIP packets in order to complete the registration session
before it expires.
If the switch is moved to the left, upon switching between the main
SIP proxy server and the backup SIP proxy server and backwards,
the router stays registered until the registration session expires.
Move the switch to the right to allow calls without registration on
the main SIP proxy server.
An IP or URL address to which calls will be forwarded if the main
or backup SIP proxy servers are unavailable.
A port of the backup route. Unless another setting is given by your
ISP, it is recommended to leave the default value (5060).
Backup SIP outbound proxy
An IP or URL address of the backup SIP outbound proxy server. The
router uses the backup SIP outbound proxy server in case of no
response from the main SIP outbound proxy server.
A port of the backup SIP outbound proxy server. Unless another
setting is given by your ISP, it is recommended to leave the default
value (5060).
Page 272 of 358
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
