D-Link DSL-G2452GR User Manual page 38

DSL-G2452GR AC1200 MU-MIMO Wireless Dual Band
VDSL2 Router with ADSL2+/3G/LTE/Gigabit Ethernet WAN
Support, 2 FXS Ports and USB Port
User Manual
9. In the opened Wireless Network Connection window, select the wireless network DSL-
G2452GR (for operating in the 2.4GHz band) or DSL-G2452GR-5G (for operating in the
5GHz band) and click the Connect button.
10. In the opened window, enter the network key (see WPS PIN on the barcode label on the
back panel of the device) in the Security key field and click the OK button.
11. Wait for about 20-30 seconds. After the connection is established, the network icon will be
displayed as the signal level scale.
If you perform initial configuration of the router via Wi-Fi connection, note that
!
immediately after changing the wireless default settings of the router you will need to
reconfigure the wireless connection using the newly specified settings.
Figure 17. The list of available networks.
Page 38 of 358
Installation and Connection