Printed Circuit Boards; Fibre Optic Cables - ABB ACS800 Hardware Manual
Hide thumbs
Also See for ACS800:
- Firmware manual (340 pages) ,
- Hardware manual (210 pages) ,
- Cabinet installation and operating instruction (162 pages)
Table of Contents
Advertisement
Printed circuit boards
WARNING! Ignoring the following instructions can cause damage to the printed
circuit boards:
•
The printed circuit boards contain components sensitive to electrostatic
discharge. Wear a grounding wrist band when handling the boards. Do not
touch the boards unnecessarily.
Fibre optic cables
WARNING! Ignoring the following instructions can cause equipment malfunction
and damage to the fibre optic cables:
•
Handle the fibre optic cables with care. When unplugging optic cables, always
grab the connector, not the cable itself. Do not touch the ends of the fibres with
bare hands as the fibre is extremely sensitive to dirt. The minimum allowed
bend radius is 35 mm (1.4 in.).
9
Safety instructions
Advertisement
Table of Contents
