Leds - ABB ACS800 Hardware Manual
Hide thumbs
Also See for ACS800:
- Firmware manual (340 pages) ,
- Hardware manual (210 pages) ,
- Cabinet installation and operating instruction (162 pages)
Table of Contents
Advertisement
74
LEDs
This table describes LEDs of the drive.
Where
RMIO board
Control panel mounting platform
AINT board
Maintenance
LED
Red
Drive in fault state
Green
The power supply on the board is OK.
Red
Drive in fault state
Green
The main + 24 V power supply for the control panel and the
RMIO board is OK.
V204 (green)
+5 V voltage of the board is OK.
V309 (red)
Prevention of unexpected start is ON.
V310 (green)
IGBT control signal transmission to the gate driver control
boards is enabled.
When the LED is lit
Advertisement
Table of Contents
