About This Manual; What This Chapter Contains; Target Audience; Common Chapters For Several Products - ABB ACS800 Hardware Manual

About this manual

What this chapter contains

This chapter describes the intended audience and contents of the manual. It
contains a flowchart of steps in checking the delivery, installing and commissioning
the drive. The flowchart refers to chapters/sections in this manual and other
manuals.

Target audience

This manual is intended for people who plan the electrical installation, install,
commission, use and service the drive. Read the manual before working on the
drive. The reader is expected to know the fundamentals of electricity, wiring,
electrical components and electrical schematic symbols.
The manual is written for readers worldwide. Both SI and imperial units are shown.
Special US instructions for installations within the United States that must be
installed per the National Electrical Code and local codes are marked with (US).

Common chapters for several products

Chapters
Resistor braking
and ACS800-07/U7 types up to -0610-x.
U1, ACS800-02/U2 and ACS800-04/04M/U4.

Categorization according to the frame size

The instructions, technical data and dimensional drawings which concern only
certain frame sizes are marked with the symbol of the frame size R2, R3... or R8.
The frame size is not marked on the drive designation label. To identify the frame
size of your drive, see rating tables in chapter

Categorization according to the plus code

The instructions, technical data and dimensional drawings which concern only
certain optional selections are marked with plus codes, e.g. +E210 or +H354. The
options included in the drive can be identified from the plus codes visible on the type
designation label of the drive. The plus code selections are listed in chapter The
ACS800-04/U4 and ACS800-04M under
Planning the electrical installation, Motor control and I/O board (RMIO)
apply to the ACS800-01/U1, ACS800-02/U2, ACS800-04/04M/U4
Safety instructions apply to the ACS800-01/
Technical data.
Type code.
19
and
About this manual